If you have your password forgotten, there many steps should be done to get back to the default configuration.
For S50N series - with FTOS Boot code (it’d be different if it’s not FTOS Boot Code), things to do are :

1) Connect to console. [if you have a cisco console before, then it's nice to have].
2) Power Cycle the chassis.
3) Press ANY key while following line appears:

U Boot relocated to 0ffe0000
### main_loop entered: bootdelay=1
### main_loop: bootcmd=”bootm 0xfe6000f0″
Hit any key to stop autoboot: 0 <<< Press any key here
=>
=> go 0×00040004 <<< Type this command to enter “BOOT_USER” mode.

[It's really fast booting, so you have to be very aware of pressing any key before the switch load the last configuration].

BOOT_USER #

4) Type “ignore startup config ” to delete start-up config.

5) Type “ignore enable password” to disable password (preferred way for
Password recovery alone)

6) Reload the chassis using “reload” command.
Now while the box is reloading, break into the netbsd prompt using
control C and execute the below list of commands to erase the file system
sectors and then power cycling the unit:
======================================================================
Software Image[1] Image type : 2
Software Image[1] Header Size : 100
Software Image[1] Img Data Size : 3652352
Software Image[1] Img Orig Size : 3652352
Software Image[1] Family Code : cp
Software Image[1] Img file Name : CPRPLP-RPM-AP-7.7.1.0.bin
Software Image[1] Hdr Checksum : 0×4961346e
Software Image[1] Data Checksum : 0×48c9f55c
SOFTWARE IMAGE HEADER DATA :
—————————-
Software Image[2] Ma ^C (Press cntrl+C while the
image is loading during the bootup process)

7.Copy and paste the below commands one by one at this prompt, ONE by ONE !
You should get a successfull respond from the system, after entering the correct command.
If it goes to “>” Prompt, re-enter the command till it back to “#”
sysctl_f10 -w ddb.command=”call flashStrataJ3CEraseSector(0×01a00000)”
sysctl_f10 -w ddb.command=”call flashStrataJ3CEraseSector(0×01a40000)”
sysctl_f10 -w ddb.command=”call flashStrataJ3CEraseSector(0×01a80000)”
sysctl_f10 -w ddb.command=”call flashStrataJ3CEraseSector(0×01ac0000)”
sysctl_f10 -w ddb.command=”call flashStrataJ3CEraseSector(0×01b00000)”
sysctl_f10 -w ddb.command=”call flashStrataJ3CEraseSector(0×01b40000)”
sysctl_f10 -w ddb.command=”call flashStrataJ3CEraseSector(0×01b80000)”
sysctl_f10 -w ddb.command=”call flashStrataJ3CEraseSector(0×01bc0000)”
sysctl_f10 -w ddb.command=”call flashStrataJ3CEraseSector(0×01c00000)”
sysctl_f10 -w ddb.command=”call flashStrataJ3CEraseSector(0×01c40000)”
sysctl_f10 -w ddb.command=”call flashStrataJ3CEraseSector(0×01c80000)”
sysctl_f10 -w ddb.command=”call flashStrataJ3CEraseSector(0×01cc0000)”

8. Command to power cycle:
=========================
sysctl_f10 -w ddb.command=”call ssCpldBoardReset”

Now the prompt shoudl be  : Force10>
Go head to enable till you have : Force10#
Configure your enable password.

– Taken from Force10 Documentation –

a. rahman isnaini r.sutan

[root@ipv6]# cd /etc/mail
[root@ipv6 /etc/mail]# ls
Makefile                aliases.db              freebsd.submit.mc       mailertable.sample      virtusertable.sample
README                  freebsd.cf              helpfile                sendmail.cf
access.sample           freebsd.mc              mailer.conf             spamassassin
aliases                 freebsd.submit.cf       mailer.conf.old         submit.cf
[root@ipv6 /etc/mail]# mkdir -p -m555 certs
[root@ipv6 /etc/mail]# chown root:mail certs
[root@ipv6 /etc/mail]# chmod 550 certs

B. Locate OpenSSL
[root@ipv6 /etc/mail]# locate ssl
/etc/ssl
/etc/ssl/openssl.cnf
/usr/bin/openssl

C. Generate RSA Key with file name ipv6indonet.ppm using openSSL
[root@ipv6 /etc/mail/certs]#  /usr/bin/openssl req -new -newkey rsa:1024 -days 365 -nodes -x509 -keyout ipv6indonet.pem  -out ipv6indonet.pem
Generating a 1024 bit RSA private key
………………..++++++
………++++++
writing new private key to ‘ipv6indonet.pem’
—–
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter ‘.’, the field will be left blank.
—–
Country Name (2 letter code) [AU]:ID
State or Province Name (full name) [Some-State]:DKI
Locality Name (eg, city) []:Jakarta
Organization Name (eg, company) [Internet Widgits Pty Ltd]:NOC
Organizational Unit Name (eg, section) []:Noc_Noc
Common Name (eg, YOUR name) []:demolitionman
Email Address []:demolitionman@localhost

[root@ipv6 /etc/mail]# chmod 500 certs/cert.pem
[root@ipv6 /etc/mail]# chown root:0 certs/cert.pem
[root@ipv6 /etc/mail]# cat ipv6indonet.pem >> certs/cert.pem

D. Create qpopper file configuration
[root@ipv6 /var/log]# vi /etc/mail/qpopper.config
set tls-support = alternate-port
set tls-version = default
set tls-server-cert-file = /etc/mail/certs/ipv6indonet.pem

E. Change/Add option for Inetd Qpopper to load ’secured’ qpopper.config
Change pop3 to pop3s [unless the config would not work]
[root@ipv6 /var/log]# vi /etc/inetd.conf

pop3s   stream  tcp6    nowait  root    /usr/local/sbin/popper  popper -l1 -f /etc/mail/qpopper.config
pop3s   stream  tcp     nowait  root    /usr/local/sbin/popper  popper -l1 -f /etc/mail/qpopper.config

F. Restart INETD
[root@ipv6 /var/log]# killall -9 inetd
[root@ipv6 /var/log]# /usr/sbin/inetd
[root@ipv6 /var/log]# telnet 202.159.33.33 110
Trying 202.159.33.33…
telnet: connect to address 202.159.33.33: Connection refused
telnet: Unable to connect to remote host
[root@ipv6 /var/log]# telnet 202.159.33.33 995
Trying 202.159.33.33…
Connected to ipv6.indo.net.id.
Escape character is ‘^]’.
^]
telnet> quit
Connection closed.

[root@ipv6 /var/log]# telnet 2404:170:33::33 995
Trying 2404:170:33::33…
Connected to 2404:170:33::33.
Escape character is ‘^]’.
quit
^CConnection closed by foreign host.

IPv6 also listening on port 995

a. rahman isnaini r.sutan
Powered by Um Geir.

B. Get the lastest One
[root@ipv6 /usr/local/src]# wget ftp://ftp.qualcomm.com/eudora/servers/unix/popper/qpopper4.0.17.tar.gz
–15:26:32–  ftp://ftp.qualcomm.com/eudora/servers/unix/popper/qpopper4.0.17.tar.gz
=> `qpopper4.0.17.tar.gz’
Resolving ftp.qualcomm.com… 199.106.114.80
Connecting to ftp.qualcomm.com|199.106.114.80|:21… connected.
Logging in as anonymous … Logged in!
==> SYST … done.    ==> PWD … done.
==> TYPE I … done.  ==> CWD /eudora/servers/unix/popper … done.
==> PASV … done.    ==> RETR qpopper4.0.17.tar.gz … done.
Length: 2,357,602 (2.2M) (unauthoritative)

100%[========================================================================================>] 2,357,602     28.22K/s    ETA 00:00

15:28:19 (22.77 KB/s) - `qpopper4.0.17.tar.gz’ saved [2357602]

C. Extraction
[root@ipv6 /usr/local/src]# tar -xzvf qpopper4.0.17.tar.gz
qpopper4.0.17/
qpopper4.0.17/conf.h
qpopper4.0.17/config.h.in
qpopper4.0.17/configure
qpopper4.0.17/configure.in
qpopper4.0.17/GUIDE.pdf
qpopper4.0.17/install-sh
qpopper4.0.17/License.txt
qpopper4.0.17/Makefile.in
qpopper4.0.17/misc.h
qpopper4.0.17/README
qpopper4.0.17/update-copyright
qpopper4.0.17/common/
qpopper4.0.17/common/check_group.c
qpopper4.0.17/common/flock.c
qpopper4.0.17/common/flock.h
qpopper4.0.17/common/logit.c
qpopper4.0.17/common/logit.h
qpopper4.0.17/common/maillock.c
qpopper4.0.17/common/maillock.h
qpopper4.0.17/common/Makefile.in
qpopper4.0.17/common/sieve_lock.c
qpopper4.0.17/common/sieve_lock.h
qpopper4.0.17/common/snprintf.c
qpopper4.0.17/common/snprintf.h
qpopper4.0.17/common/string_util.c
qpopper4.0.17/common/string_util.h
qpopper4.0.17/common/utils.c
qpopper4.0.17/common/utils.h
qpopper4.0.17/doc/
qpopper4.0.17/doc/Changes
qpopper4.0.17/doc/LMOS-FAQ.html
qpopper4.0.17/doc/mac
qpopper4.0.17/doc/README.Berkeley
qpopper4.0.17/doc/Release.Notes
qpopper4.0.17/doc/rfc1939.txt
qpopper4.0.17/doc/rfc2449.txt
qpopper4.0.17/doc/guide/
qpopper4.0.17/doc/guide/Qpopper.book
qpopper4.0.17/doc/guide/%Qpopper.book
qpopper4.0.17/doc/guide/Qpopper.fm
qpopper4.0.17/doc/guide/Qpopper.IX.fm
qpopper4.0.17/doc/guide/%Qpopper.IX.fm
qpopper4.0.17/doc/guide/Qpopper.TOC.fm
qpopper4.0.17/doc/guide/%Qpopper.TOC.fm
qpopper4.0.17/doc/guide/Qpopper_cover.fm
qpopper4.0.17/man/
qpopper4.0.17/man/popauth.8
qpopper4.0.17/man/poppassd.8
qpopper4.0.17/man/popper.8
qpopper4.0.17/mmangle/
qpopper4.0.17/mmangle/charmangle.c
qpopper4.0.17/mmangle/charmangle.h
qpopper4.0.17/mmangle/enriched.c
qpopper4.0.17/mmangle/enriched.h
qpopper4.0.17/mmangle/etags.c
qpopper4.0.17/mmangle/etags.gperf
qpopper4.0.17/mmangle/lineend.c
qpopper4.0.17/mmangle/lineend.h
qpopper4.0.17/mmangle/Makefile.in
qpopper4.0.17/mmangle/mangle.c
qpopper4.0.17/mmangle/mangle.h
qpopper4.0.17/mmangle/mime.c
qpopper4.0.17/mmangle/mime.h
qpopper4.0.17/mmangle/mkfile
qpopper4.0.17/mmangle/README
qpopper4.0.17/mmangle/striphtml.c
qpopper4.0.17/mmangle/striphtml.h
qpopper4.0.17/mmangle/testhtml.c
qpopper4.0.17/mmangle/testj.c
qpopper4.0.17/mmangle/testjig.c
qpopper4.0.17/mmangle/test/
qpopper4.0.17/mmangle/test/1847
qpopper4.0.17/mmangle/test/1847++
qpopper4.0.17/mmangle/test/1847++.out
qpopper4.0.17/mmangle/test/1847.out
qpopper4.0.17/mmangle/test/2047
qpopper4.0.17/mmangle/test/2047-real
qpopper4.0.17/mmangle/test/2047-real.out
qpopper4.0.17/mmangle/test/2047.out
qpopper4.0.17/mmangle/test/822
qpopper4.0.17/mmangle/test/822.out
qpopper4.0.17/mmangle/test/822long
qpopper4.0.17/mmangle/test/apple-single
qpopper4.0.17/mmangle/test/apple-single.out
qpopper4.0.17/mmangle/test/bad-mime
qpopper4.0.17/mmangle/test/bad-mime.out
qpopper4.0.17/mmangle/test/binary
qpopper4.0.17/mmangle/test/binary.out
qpopper4.0.17/mmangle/test/binhex
qpopper4.0.17/mmangle/test/binhex.out
qpopper4.0.17/mmangle/test/charset
qpopper4.0.17/mmangle/test/charset.out
qpopper4.0.17/mmangle/test/e.out.html
qpopper4.0.17/mmangle/test/enriched
qpopper4.0.17/mmangle/test/enriched-excerpt
qpopper4.0.17/mmangle/test/enriched-excerpt.out
qpopper4.0.17/mmangle/test/enriched.out
qpopper4.0.17/mmangle/test/etags
qpopper4.0.17/mmangle/test/eudora1
qpopper4.0.17/mmangle/test/eudora1.out
qpopper4.0.17/mmangle/test/fwd-html
qpopper4.0.17/mmangle/test/fwd-html.out
qpopper4.0.17/mmangle/test/html
qpopper4.0.17/mmangle/test/html.out
qpopper4.0.17/mmangle/test/html2
qpopper4.0.17/mmangle/test/html2.out
qpopper4.0.17/mmangle/test/html3
qpopper4.0.17/mmangle/test/html3.out
qpopper4.0.17/mmangle/test/html4
qpopper4.0.17/mmangle/test/html4.out
qpopper4.0.17/mmangle/test/html5
qpopper4.0.17/mmangle/test/html5.out
qpopper4.0.17/mmangle/test/html6
qpopper4.0.17/mmangle/test/html6.out
qpopper4.0.17/mmangle/test/html7
qpopper4.0.17/mmangle/test/html7.out
qpopper4.0.17/mmangle/test/Makefile
qpopper4.0.17/mmangle/test/mult-alt
qpopper4.0.17/mmangle/test/mult-alt-html
qpopper4.0.17/mmangle/test/mult-alt.out
qpopper4.0.17/mmangle/test/mult-alt2
qpopper4.0.17/mmangle/test/mult-alt2.out
qpopper4.0.17/mmangle/test/mult-deep
qpopper4.0.17/mmangle/test/mult-deep.out
qpopper4.0.17/mmangle/test/mult-report
qpopper4.0.17/mmangle/test/mult-report.out
qpopper4.0.17/mmangle/test/ns-html
qpopper4.0.17/mmangle/test/ns-html.out
qpopper4.0.17/mmangle/test/ns-html2
qpopper4.0.17/mmangle/test/ns-html2.out
qpopper4.0.17/mmangle/test/ns-html3
qpopper4.0.17/mmangle/test/ns-html3.out
qpopper4.0.17/mmangle/test/plain
qpopper4.0.17/mmangle/test/plain.out
qpopper4.0.17/mmangle/test/qp
qpopper4.0.17/mmangle/test/qp-enriched
qpopper4.0.17/mmangle/test/qp-enriched.out
qpopper4.0.17/mmangle/test/qp.out
qpopper4.0.17/mmangle/test/t
qpopper4.0.17/mmangle/test/text-lines
qpopper4.0.17/mmangle/test/text-lines.out
qpopper4.0.17/password/
qpopper4.0.17/password/auth_user.c
qpopper4.0.17/password/Makefile.in
qpopper4.0.17/password/poppassd.c
qpopper4.0.17/password/README
qpopper4.0.17/popper/
qpopper4.0.17/popper/banner.h
qpopper4.0.17/popper/base64.c
qpopper4.0.17/popper/drac.c
qpopper4.0.17/popper/genpath.c
qpopper4.0.17/popper/genpath.h
qpopper4.0.17/popper/get_sub_opt.c
qpopper4.0.17/popper/get_sub_opt.h
qpopper4.0.17/popper/hmac-md5.h
qpopper4.0.17/popper/hmac.c
qpopper4.0.17/popper/main.c
qpopper4.0.17/popper/Makefile.in
qpopper4.0.17/popper/md5.c
qpopper4.0.17/popper/md5.h
qpopper4.0.17/popper/mktemp.c
qpopper4.0.17/popper/msg_ptr.c
qpopper4.0.17/popper/pop_apop.c
qpopper4.0.17/popper/pop_auth.c
qpopper4.0.17/popper/pop_bull.c
qpopper4.0.17/popper/pop_cache.c
qpopper4.0.17/popper/pop_config.c
qpopper4.0.17/popper/pop_dele.c
qpopper4.0.17/popper/pop_dropcopy.c
qpopper4.0.17/popper/pop_extend.c
qpopper4.0.17/popper/pop_get_command.c
qpopper4.0.17/popper/pop_get_subcommand.c
qpopper4.0.17/popper/pop_init.c
qpopper4.0.17/popper/pop_last.c
qpopper4.0.17/popper/pop_list.c
qpopper4.0.17/popper/pop_log.c
qpopper4.0.17/popper/pop_lower.c
qpopper4.0.17/popper/pop_msg.c
qpopper4.0.17/popper/pop_parse.c
qpopper4.0.17/popper/pop_pass.c
qpopper4.0.17/popper/pop_pope.c
qpopper4.0.17/popper/pop_quit.c
qpopper4.0.17/popper/pop_rpop.c
qpopper4.0.17/popper/pop_rset.c
qpopper4.0.17/popper/pop_send.c
qpopper4.0.17/popper/pop_stat.c
qpopper4.0.17/popper/pop_tls.c
qpopper4.0.17/popper/pop_tls.h
qpopper4.0.17/popper/pop_tls_openssl.c
qpopper4.0.17/popper/pop_tls_sslplus.c
qpopper4.0.17/popper/pop_uidl.c
qpopper4.0.17/popper/pop_updt.c
qpopper4.0.17/popper/pop_user.c
qpopper4.0.17/popper/pop_util.c
qpopper4.0.17/popper/pop_xmit.c
qpopper4.0.17/popper/pop_xtnd.c
qpopper4.0.17/popper/popauth.c
qpopper4.0.17/popper/popper.c
qpopper4.0.17/popper/popper.h
qpopper4.0.17/popper/scram.c
qpopper4.0.17/popper/scram.h
qpopper4.0.17/popper/sslplus_utils.c
qpopper4.0.17/popper/sslplus_utils.h
qpopper4.0.17/popper/version.h
qpopper4.0.17/popper/xtnd_xlst.c
qpopper4.0.17/samples/
qpopper4.0.17/samples/qpopper.config
qpopper4.0.17/samples/qpopper.pam
qpopper4.0.17/samples/qpopper.xinetd
qpopper4.0.17/test/
qpopper4.0.17/test/new
qpopper4.0.17/test/run.pl
qpopper4.0.17/test/tdiff
qpopper4.0.17/test/tgen
qpopper4.0.17/test/tscript
qpopper4.0.17/test/out/
qpopper4.0.17/test/out/1.i
qpopper4.0.17/test/out/1.r.h
qpopper4.0.17/test/out/1.r.p
qpopper4.0.17/test/out/10.i
qpopper4.0.17/test/out/10.r.h
qpopper4.0.17/test/out/10.r.p
qpopper4.0.17/test/out/11.i
qpopper4.0.17/test/out/11.r.h
qpopper4.0.17/test/out/11.r.p
qpopper4.0.17/test/out/12.i
qpopper4.0.17/test/out/12.r.h
qpopper4.0.17/test/out/12.r.p
qpopper4.0.17/test/out/13.i
qpopper4.0.17/test/out/13.r.h
qpopper4.0.17/test/out/13.r.p
qpopper4.0.17/test/out/14.i
qpopper4.0.17/test/out/14.r.h
qpopper4.0.17/test/out/14.r.p
qpopper4.0.17/test/out/15.i
qpopper4.0.17/test/out/15.r.h
qpopper4.0.17/test/out/15.r.p
qpopper4.0.17/test/out/16.i
qpopper4.0.17/test/out/16.r.h
qpopper4.0.17/test/out/16.r.p
qpopper4.0.17/test/out/17.i
qpopper4.0.17/test/out/17.r.h
qpopper4.0.17/test/out/17.r.p
qpopper4.0.17/test/out/18.i
qpopper4.0.17/test/out/18.r.h
qpopper4.0.17/test/out/18.r.p
qpopper4.0.17/test/out/19.i
qpopper4.0.17/test/out/19.r.h
qpopper4.0.17/test/out/19.r.p
qpopper4.0.17/test/out/2.i
qpopper4.0.17/test/out/2.r.h
qpopper4.0.17/test/out/2.r.p
qpopper4.0.17/test/out/20.i
qpopper4.0.17/test/out/20.r.h
qpopper4.0.17/test/out/20.r.p
qpopper4.0.17/test/out/21.i
qpopper4.0.17/test/out/21.r.h
qpopper4.0.17/test/out/21.r.p
qpopper4.0.17/test/out/22.i
qpopper4.0.17/test/out/22.r.h
qpopper4.0.17/test/out/22.r.p
qpopper4.0.17/test/out/23.i
qpopper4.0.17/test/out/23.r.h
qpopper4.0.17/test/out/23.r.p
qpopper4.0.17/test/out/24.i
qpopper4.0.17/test/out/24.r.h
qpopper4.0.17/test/out/24.r.p
qpopper4.0.17/test/out/25.i
qpopper4.0.17/test/out/25.r.h
qpopper4.0.17/test/out/25.r.p
qpopper4.0.17/test/out/26.i
qpopper4.0.17/test/out/26.r.h
qpopper4.0.17/test/out/26.r.p
qpopper4.0.17/test/out/27.i
qpopper4.0.17/test/out/27.r.h
qpopper4.0.17/test/out/27.r.p
qpopper4.0.17/test/out/28.i
qpopper4.0.17/test/out/28.r.h
qpopper4.0.17/test/out/28.r.p
qpopper4.0.17/test/out/29.i
qpopper4.0.17/test/out/29.r.h
qpopper4.0.17/test/out/29.r.p
qpopper4.0.17/test/out/3.i
qpopper4.0.17/test/out/3.r.h
qpopper4.0.17/test/out/3.r.p
qpopper4.0.17/test/out/30.i
qpopper4.0.17/test/out/30.r.h
qpopper4.0.17/test/out/30.r.p
qpopper4.0.17/test/out/31.i
qpopper4.0.17/test/out/31.r.h
qpopper4.0.17/test/out/31.r.p
qpopper4.0.17/test/out/32.i
qpopper4.0.17/test/out/32.r.h
qpopper4.0.17/test/out/32.r.p
qpopper4.0.17/test/out/33.i
qpopper4.0.17/test/out/33.r.h
qpopper4.0.17/test/out/33.r.p
qpopper4.0.17/test/out/34.i
qpopper4.0.17/test/out/34.r.h
qpopper4.0.17/test/out/34.r.p
qpopper4.0.17/test/out/35.i
qpopper4.0.17/test/out/35.r.h
qpopper4.0.17/test/out/35.r.p
qpopper4.0.17/test/out/36.i
qpopper4.0.17/test/out/36.r.h
qpopper4.0.17/test/out/36.r.p
qpopper4.0.17/test/out/37.i
qpopper4.0.17/test/out/37.r.h
qpopper4.0.17/test/out/37.r.p
qpopper4.0.17/test/out/38.i
qpopper4.0.17/test/out/38.r.h
qpopper4.0.17/test/out/38.r.p
qpopper4.0.17/test/out/39.i
qpopper4.0.17/test/out/39.r.h
qpopper4.0.17/test/out/39.r.p
qpopper4.0.17/test/out/4.i
qpopper4.0.17/test/out/4.r.h
qpopper4.0.17/test/out/4.r.p
qpopper4.0.17/test/out/40.i
qpopper4.0.17/test/out/40.r.h
qpopper4.0.17/test/out/40.r.p
qpopper4.0.17/test/out/41.i
qpopper4.0.17/test/out/41.r.h
qpopper4.0.17/test/out/41.r.p
qpopper4.0.17/test/out/42.i
qpopper4.0.17/test/out/42.r.h
qpopper4.0.17/test/out/42.r.p
qpopper4.0.17/test/out/43.i
qpopper4.0.17/test/out/43.r.h
qpopper4.0.17/test/out/43.r.p
qpopper4.0.17/test/out/44.i
qpopper4.0.17/test/out/44.r.h
qpopper4.0.17/test/out/44.r.p
qpopper4.0.17/test/out/5.i
qpopper4.0.17/test/out/5.r.h
qpopper4.0.17/test/out/5.r.p
qpopper4.0.17/test/out/6.i
qpopper4.0.17/test/out/6.r.h
qpopper4.0.17/test/out/6.r.p
qpopper4.0.17/test/out/7.i
qpopper4.0.17/test/out/7.r.h
qpopper4.0.17/test/out/7.r.p
qpopper4.0.17/test/out/8.i
qpopper4.0.17/test/out/8.r.h
qpopper4.0.17/test/out/8.r.p
qpopper4.0.17/test/out/9.i
qpopper4.0.17/test/out/9.r.h
qpopper4.0.17/test/out/9.r.p
qpopper4.0.17/test/out/qpop.42
qpopper4.0.17/test/out/qpop.8
qpopper4.0.17/test/out/run.pl
qpopper4.0.17/test/out/test/
qpopper4.0.17/test/out/test/1847
qpopper4.0.17/test/out/test/1847++
qpopper4.0.17/test/out/test/1847++.out
qpopper4.0.17/test/out/test/1847.out
qpopper4.0.17/test/out/test/2047
qpopper4.0.17/test/out/test/2047-real
qpopper4.0.17/test/out/test/2047-real.out
qpopper4.0.17/test/out/test/2047.out
qpopper4.0.17/test/out/test/822
qpopper4.0.17/test/out/test/822.out
qpopper4.0.17/test/out/test/822long
qpopper4.0.17/test/out/test/apple-single
qpopper4.0.17/test/out/test/apple-single.out
qpopper4.0.17/test/out/test/b64
qpopper4.0.17/test/out/test/b64.out
qpopper4.0.17/test/out/test/bad-mime
qpopper4.0.17/test/out/test/bad-mime.out
qpopper4.0.17/test/out/test/binary
qpopper4.0.17/test/out/test/binary.out
qpopper4.0.17/test/out/test/binhex
qpopper4.0.17/test/out/test/binhex.out
qpopper4.0.17/test/out/test/charset
qpopper4.0.17/test/out/test/charset.out
qpopper4.0.17/test/out/test/e.out.html
qpopper4.0.17/test/out/test/enriched
qpopper4.0.17/test/out/test/enriched-excerpt
qpopper4.0.17/test/out/test/enriched-excerpt.out
qpopper4.0.17/test/out/test/enriched.o
qpopper4.0.17/test/out/test/enriched.out
qpopper4.0.17/test/out/test/etags
qpopper4.0.17/test/out/test/etags.o
qpopper4.0.17/test/out/test/eudora1
qpopper4.0.17/test/out/test/eudora1.out
qpopper4.0.17/test/out/test/fwd-html
qpopper4.0.17/test/out/test/fwd-html.out
qpopper4.0.17/test/out/test/html
qpopper4.0.17/test/out/test/html.out
qpopper4.0.17/test/out/test/html2
qpopper4.0.17/test/out/test/html2.out
qpopper4.0.17/test/out/test/html3
qpopper4.0.17/test/out/test/html3.out
qpopper4.0.17/test/out/test/html4
qpopper4.0.17/test/out/test/html4.out
qpopper4.0.17/test/out/test/html5
qpopper4.0.17/test/out/test/html5.out
qpopper4.0.17/test/out/test/html6
qpopper4.0.17/test/out/test/html6.out
qpopper4.0.17/test/out/test/html7
qpopper4.0.17/test/out/test/html7.out
qpopper4.0.17/test/out/test/lineend.o
qpopper4.0.17/test/out/test/Makefile
qpopper4.0.17/test/out/test/mangle.o
qpopper4.0.17/test/out/test/mime.o
qpopper4.0.17/test/out/test/mult-alt
qpopper4.0.17/test/out/test/mult-alt-html
qpopper4.0.17/test/out/test/mult-alt.out
qpopper4.0.17/test/out/test/mult-alt2
qpopper4.0.17/test/out/test/mult-alt2.out
qpopper4.0.17/test/out/test/mult-deep
qpopper4.0.17/test/out/test/mult-deep.out
qpopper4.0.17/test/out/test/mult-report
qpopper4.0.17/test/out/test/mult-report.out
qpopper4.0.17/test/out/test/ns-html
qpopper4.0.17/test/out/test/ns-html.out
qpopper4.0.17/test/out/test/ns-html2
qpopper4.0.17/test/out/test/ns-html2.out
qpopper4.0.17/test/out/test/ns-html3
qpopper4.0.17/test/out/test/ns-html3.out
qpopper4.0.17/test/out/test/plain
qpopper4.0.17/test/out/test/plain.out
qpopper4.0.17/test/out/test/qp
qpopper4.0.17/test/out/test/qp-enriched
qpopper4.0.17/test/out/test/qp-enriched.out
qpopper4.0.17/test/out/test/qp.out
qpopper4.0.17/test/out/test/striphtml.o
qpopper4.0.17/test/out/test/t
qpopper4.0.17/test/out/test/testhtml
qpopper4.0.17/test/out/test/testhtml.o
qpopper4.0.17/test/out/test/testj
qpopper4.0.17/test/out/test/testj.o
qpopper4.0.17/test/out/test/testjig
qpopper4.0.17/test/out/test/testjig.o
qpopper4.0.17/test/out/test/text-lines
qpopper4.0.17/test/out/test/text-lines.out
qpopper4.0.17/test/out/test/utils.o
qpopper4.0.17/test/out/tscript

D. Installation
[root@ipv6 /usr/local/src]# cd qpopper4.0.17
[root@ipv6 /usr/local/src/qpopper4.0.17]# ls
GUIDE.pdf               common                  configure.in            misc.h                  samples
License.txt             conf.h                  doc                     mmangle                 test
Makefile.in             config.h.in             install-sh              password                update-copyright
README                  configure               man                     popper

[root@ipv6 /usr/local/src/qpopper4.0.17]# ./configure
checking whether make sets $(MAKE)… yes
checking for gcc… gcc
checking for C compiler default output file name… a.out
checking whether the C compiler works… yes
checking whether we are cross compiling… no
checking for suffix of executables…
checking for suffix of object files… o
checking whether we are using the GNU C compiler… yes
checking whether gcc accepts -g… yes
checking for gcc option to accept ISO C89… none needed
checking for library containing strerror… none required
checking for bison… bison -y
checking for flex… flex
checking lex output file root… lex.yy
checking lex library… -lfl
checking whether yytext is a pointer… yes
checking for ar… ar
checking for ranlib… ranlib
checking for a BSD-compatible install… /usr/bin/install -c
checking for gperf… gperf
checking for gcc version 2.7.2.3… no
checking if gcc supports __attribute__ (format) … yes
checking if ar chokes on -r… no
checking for getspnam… no
checking for getprpwnam… no
checking for getspnam in -lshadow… no
Will NOT compile in debugging code
System name: FreeBSD; System version: 5.1-RELEASE
Set OS_DEFS =  -DFREEBSD -DUNIX
Logging to facility: LOG_LOCAL0
Set AR_FLAG =  -r ; RANLIB_CMD =
checking for sendmail program… found at /usr/sbin/sendmail
checking for mail spool directory… “found at /var/mail”
checking for dirent.h that defines DIR… yes
checking for library containing opendir… none required
checking how to run the C preprocessor… gcc -E
checking for grep that handles long lines and -e… /usr/bin/grep
checking for egrep… /usr/bin/grep -E
checking for ANSI C header files… yes
checking for sys/wait.h that is POSIX.1 compatible… yes
checking whether sys_siglist is declared… yes
checking for sys/types.h… yes
checking for sys/stat.h… yes
checking for stdlib.h… yes
checking for string.h… yes
checking for memory.h… yes
checking for strings.h… yes
checking for inttypes.h… yes
checking for stdint.h… yes
checking for unistd.h… yes
checking prot.h usability… no
checking prot.h presence… no
checking for prot.h… no
checking fcntl.h usability… yes
checking fcntl.h presence… yes
checking for fcntl.h… yes
checking limits.h usability… yes
checking limits.h presence… yes
checking for limits.h… yes
checking for strings.h… (cached) yes
checking sys/param.h usability… yes
checking sys/param.h presence… yes
checking for sys/param.h… yes
checking sys/file.h usability… yes
checking sys/file.h presence… yes
checking for sys/file.h… yes
checking sys/security.h usability… no
checking sys/security.h presence… no
checking for sys/security.h… no
checking sys/syslog.h usability… yes
checking sys/syslog.h presence… yes
checking for sys/syslog.h… yes
checking for sys/types.h… (cached) yes
checking sys/fcntl.h usability… yes
checking sys/fcntl.h presence… yes
checking for sys/fcntl.h… yes
checking sys/select.h usability… yes
checking sys/select.h presence… yes
checking for sys/select.h… yes
checking for sys/stat.h… (cached) yes
checking sys/unistd.h usability… yes
checking sys/unistd.h presence… yes
checking for sys/unistd.h… yes
checking sys/netinet/in.h usability… no
checking sys/netinet/in.h presence… no
checking for sys/netinet/in.h… no
checking sys/time.h usability… yes
checking sys/time.h presence… yes
checking for sys/time.h… yes
checking sys/syslimits.h usability… yes
checking sys/syslimits.h presence… yes
checking for sys/syslimits.h… yes
checking syslog.h usability… yes
checking syslog.h presence… yes
checking for syslog.h… yes
checking net/errno.h usability… no
checking net/errno.h presence… no
checking for net/errno.h… no
checking for unistd.h… (cached) yes
checking netinet/in.h usability… yes
checking netinet/in.h presence… yes
checking for netinet/in.h… yes
checking maillock.h usability… no
checking maillock.h presence… no
checking for maillock.h… no
checking select.h usability… no
checking select.h presence… no
checking for select.h… no
checking shadow.h usability… no
checking shadow.h presence… no
checking for shadow.h… no
checking security/pam_appl.h usability… yes
checking security/pam_appl.h presence… yes
checking for security/pam_appl.h… yes
checking pam/pam_appl.h usability… no
checking pam/pam_appl.h presence… no
checking for pam/pam_appl.h… no
checking time.h usability… yes
checking time.h presence… yes
checking for time.h… yes
checking crypt.h usability… no
checking crypt.h presence… no
checking for crypt.h… no
checking ndbm.h usability… yes
checking ndbm.h presence… yes
checking for ndbm.h… yes
checking gdbm.h usability… no
checking gdbm.h presence… no
checking for gdbm.h… no
checking dbm.h usability… no
checking dbm.h presence… no
checking for dbm.h… no
checking for t_accept in -lnsl… no
checking for socket in -lsocket… no
checking for res_init in -lresolv… no
checking for maillock in -lmail… no
checking for krb_recvauth in -lkrb… no
checking for clock_gettime in -lposix4… no
checking for crypt in -lcrypt… yes
checking for set_auth_parameters in -lsecurity… no
“(use_pam is _default_)”
checking for an ANSI C-conforming const… yes
checking for uid_t in sys/types.h… yes
checking for mode_t… yes
checking for off_t… yes
checking for size_t… yes
checking whether sys_siglist is declared… (cached) yes
checking whether time.h and sys/time.h may both be included… yes
checking whether struct tm is in sys/time.h or time.h… time.h
checking for working memcmp… yes
checking return type of signal handlers… void
checking utime.h usability… yes
checking utime.h presence… yes
checking for utime.h… yes
checking whether utime accepts a null argument… yes
checking for vprintf… yes
checking for _doprnt… no
checking for wait3 that fills in rusage… yes
checking for gethostname… yes
checking for gethostbyname… yes
checking for gettimeofday… yes
checking for getusershell… yes
checking for mkdir… yes
checking for socket… yes
checking for strdup… yes
checking for strerror… yes
checking for strstr… yes
checking for strlcat… yes
checking for strlcpy… yes
checking for bcopy… yes
checking for index… yes
checking for flock… yes
checking for set_auth_parameters… no
checking for pw_encrypt… no
checking for hstrerror… yes
checking for snprintf… yes
checking for vsnprintf… yes
checking for srandom… yes
checking for srand… yes
checking for usleep… yes
checking for crypt… yes
checking for crypt16… no
checking for bigcrypt… no
checking for setproctitle… yes
checking for mkstemp… yes
checking for setresuid… yes
checking for library containing gethostbyname… none required
checking for unsigned long int… yes
checking size of unsigned long int… 4
checking for /dev/urandom … yes
configure: creating ./config.status
config.status: creating Makefile
config.status: WARNING:  Makefile.in seems to ignore the –datarootdir setting
config.status: creating common/Makefile
config.status: creating popper/Makefile
config.status: creating mmangle/Makefile
config.status: creating password/Makefile
config.status: creating config.h

[root@ipv6 /usr/local/src/qpopper4.0.17]# make && make install
cd ./popper  && make all
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_dele.c -o pop_dele.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_dropcopy.c -o pop_dropcopy.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_get_command.c -o pop_get_command.o
pop_get_command.c:41: warning: initialization from incompatible pointer type
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_get_subcommand.c -o pop_get_subcommand.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_init.c -o pop_init.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_last.c -o pop_last.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_list.c -o pop_list.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_log.c -o pop_log.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_lower.c -o pop_lower.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_msg.c -o pop_msg.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_parse.c -o pop_parse.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_pass.c -o pop_pass.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_quit.c -o pop_quit.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_rset.c -o pop_rset.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_send.c -o pop_send.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_stat.c -o pop_stat.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_updt.c -o pop_updt.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_user.c -o pop_user.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_xtnd.c -o pop_xtnd.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_xmit.c -o pop_xmit.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX popper.c -o popper.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_bull.c -o pop_bull.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX xtnd_xlst.c -o xtnd_xlst.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_uidl.c -o pop_uidl.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX mktemp.c -o mktemp.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_rpop.c -o pop_rpop.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_apop.c -o pop_apop.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX md5.c -o md5.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_auth.c -o pop_auth.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_pope.c -o pop_pope.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_extend.c -o pop_extend.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX scram.c -o scram.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX hmac.c -o hmac.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX base64.c -o base64.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_util.c -o pop_util.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX get_sub_opt.c -o get_sub_opt.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX msg_ptr.c -o msg_ptr.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX drac.c -o drac.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_config.c -o pop_config.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_tls.c -o pop_tls.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_tls_openssl.c -o pop_tls_openssl.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_tls_sslplus.c -o pop_tls_sslplus.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX sslplus_utils.c -o sslplus_utils.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX main.c -o main.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX pop_cache.c -o pop_cache.o
gcc -c -I.. -I.. -I.  -I../mmangle -I../common   -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX genpath.c -o genpath.o
cd ../mmangle && make all
gcc -c -I.. -I. -I.. -I../popper  -I../common -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX mime.c -o mime.o
gcc -c -I.. -I. -I.. -I../popper  -I../common -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX mangle.c -o mangle.o
gcc -c -I.. -I. -I.. -I../popper  -I../common -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX enriched.c -o enriched.o
gcc -c -I.. -I. -I.. -I../popper  -I../common -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX striphtml.c -o striphtml.o
gcc -c -I.. -I. -I.. -I../popper  -I../common -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX lineend.c -o lineend.o
gcc -c -I.. -I. -I.. -I../popper  -I../common -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX etags.c -o etags.o
gcc -c -I.. -I. -I.. -I../popper  -I../common -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX charmangle.c -o charmangle.o
ar -r libmangle.a mime.o mangle.o enriched.o striphtml.o  lineend.o etags.o charmangle.o
cd ../common && make all
gcc -c -I.. -I. -I.. -I../popper  -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX flock.c -o flock.o
gcc -c -I.. -I. -I.. -I../popper  -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX maillock.c -o maillock.o
gcc -c -I.. -I. -I.. -I../popper  -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX logit.c -o logit.o
gcc -c -I.. -I. -I.. -I../popper  -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX snprintf.c -o snprintf.o
gcc -c -I.. -I. -I.. -I../popper  -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX string_util.c -o string_util.o
gcc -c -I.. -I. -I.. -I../popper  -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX check_group.c -o check_group.o
gcc -c -I.. -I. -I.. -I../popper  -g -O2 -freg-struct-return -DHAVE_CONFIG_H  -DFREEBSD -DUNIX utils.c -o utils.o
ar -r libcommon.a flock.o maillock.o logit.o snprintf.o  string_util.o check_group.o utils.o
gcc   pop_dele.o pop_dropcopy.o  pop_get_command.o pop_get_subcommand.o pop_init.o  pop_last.o pop_list.o pop_log.o pop_lower.o  pop_msg.o pop_parse.o pop_pass.o pop_quit.o  pop_rset.o pop_send.o pop_stat.o pop_updt.o  pop_user.o pop_xtnd.o pop_xmit.o popper.o  pop_bull.o xtnd_xlst.o pop_uidl.o mktemp.o  pop_rpop.o pop_apop.o md5.o pop_auth.o pop_pope.o  pop_extend.o scram.o hmac.o base64.o pop_util.o  get_sub_opt.o msg_ptr.o drac.o pop_config.o pop_tls.o  pop_tls_openssl.o pop_tls_sslplus.o sslplus_utils.o  main.o pop_cache.o genpath.o -o popper ../mmangle/libmangle.a  -I../common ../common/libcommon.a  -lcrypt
Installed man/popper.8 as /usr/local/share/man/man8/popper.8
Installed man/popauth.8 as /usr/local/share/man/man8/popauth.8
cd ./popper && make install
cd ../mmangle && make all
cd ../common && make all
Installed popper as /usr/local/sbin/popper

E. Change path & Restart Popper Service under Inetd

[root@ipv6 /usr/local/src/qpopper4.0.17]# killall -9 inetd
[root@ipv6 /usr/local/src/qpopper4.0.17]# telnet localhost 110
Trying 127.0.0.1…
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host

[root@ipv6 /usr/local/src/qpopper4.0.17]# vi /etc/inetd.conf

[BEFORE]
#
pop3    stream  tcp6    nowait  root    /usr/local/libexec/popper       popper
pop3    stream  tcp     nowait  root    /usr/local/libexec/popper       popper
#

[AFTER]
#
pop3    stream  tcp6    nowait  root    /usr/local/sbin/popper  popper
pop3    stream  tcp     nowait  root    /usr/local/sbin/popper  popper
#

[root@ipv6 /usr/local/sbin]# /usr/sbin/inetd
[root@ipv6 /usr/local/sbin]#
[root@ipv6 /usr/local/sbin]# telnet localhost 110
Trying 127.0.0.1…
Connected to localhost.ipv6.indo.net.id.
Escape character is ‘^]’.
+OK Qpopper (version 4.0.17) at ipv6.indo.net.id starting.
quit
+OK Pop server at ipv6.indo.net.id signing off.
Connection closed by foreign host.

a. rahman isnaini r.sutan

Here how to remove saved password :

1. To get to the stored password, click on “Tools” -> “Options”.
2. Click on the “Security” Tab.
3. Click on the “Saved Passwords” button.
4. Remove email account which ’saved’ / ’stored’ password  forgotten.
5. Click on the “Close” button to close the Password Tab screen.
6. Click “OK” on the Options window.
7. Close Thunderbird.
8. Re-open Thunderbird.
9. When Thunderbird opens, it will prompt you for a new password.
10. Click “OK”.

a. rahman isnaini r.sutan

My experience refer to : Endian Website Information

1. Boot your Endian Firewall till you see GNU GRUB Screen & Highlighting the first choice menu to boot.
2. Immediately press ‘a’ [Note: It's realy fast, you have to put your eyes close to the screen & do it immediately]
Screen then gives you [it depends on your partition]
grub append> root=/dev/hda2 panic=10 [bla bla] quite ro

Replace ‘ro’ with ’single’ separated with a space :
grub append> root=/dev/hda2 panic=10 [bla bla] quite ro single
grub append> root=/dev/hda2 panic=10 [bla bla] quite single

Both can do.

3. Press Enter
Screen shows :  sh-3.00# _
4. Type
mount -o rw,remount /
5. Type passwd, enter.
Type xxxxxx [which is your new password] then enter.
Re-Type your new root password, enter.
6. To change admin password :
htpasswd -m /var/efw/auth/users admin
Type xxxxxx [which is your new password] then enter.
Re-Type your new admin password, enter.

7. Type sync, then enter.
8. Type reboot, then enter.

=============================================
FURTHER MORE,
WHY DON’T YOU TRY TO ACCESS https://[ipadd]:10443 ?
Replace [ipadd] with ip address of your Endian.
You are now prompted by a screen that asking the root and
admin password
=============================================

a. rahman isnaini rangkayo sutan

By Jason W.

The complete OID is 1.3.6.1.4.1.9.9.187.1.2.4.1.1.192.168.150.164.1.1
The OID of Accepted BGP Routes : 1.3.6.1.4.1.9.9.187.1.2.4.1.1
The OID of Max BGP Routes : 1.3.6.1.4.1.9.9.187.1.2.4.1.3
[well this not really important as this just to make the mrtg capturing to work, since mrtg MRTG needs to graph two variables/OIDs].
The IP Address of the BGP Peer being monitored : 192.168.150.164
The version of IP & Routing Type : 1.1 > IPv4 & Unicast.

mrtg# vi /export/cfg/bgp-prefix.cfg

WorkDir: /var/data-mrtg/bgp
LogFormat: rrdtool
PathAdd: /usr/local/bin/
LibAdd: /usr/local/lib/perl5/5.8.8
Interval: 5
Refresh: 300
Forks: 4

Options[_]: gauge, nopercent, integer
Unscaled[_]: ymwd
YLegend[_]: Number of Prefix
ShortLegend[_]:
LegendI[_]:   Received Prefixes
LegendO[_]:   Withdrawn Prefixes
Legend1[_]: Number of Accepted Prefixes
Legend2[_]: Withdrawn

### as999
Target[bgp-as999]: 1.3.6.1.4.1.9.9.187.1.2.4.1.1.192.168.150.164.1.1&1.3.6.1.4.1.9.9.187.1.2.4.1.3.192.168.150.164.1.1:public@192.168.150.129
MaxBytes[bgp-as999]: 1250
Title[bgp-as999]: BGP Prefixes AS999
PageTop[bgp-as999]:

BGP Prefixes AS999

=================== Options Information ======================
More information on : MRTG Website

gauge

Treat the values gathered from target as ‘current status’ measurements
and not as ever incrementing counters.
This would be useful to monitor things like disk space, BGP Prefixes,
processor load, temperature, and the like …

integer

Print summary lines below graph as integers without commas, if you missed this on your option… MRTG would print / plot the value with additional x.000 for example 50 prefixes > 50.000 prefixes.
nopercent

Don’t print usage percentages.

==================== Router IOS Version =======================

3750-GW#sh ver
Cisco IOS Software, 3700 Software (C3725-ADVIPSERVICESK9-M), Version 12.4(3), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 22-Jul-05 02:27 by hqluong

ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1)

3750-GW uptime is 20 weeks, 19 hours, 34 minutes
System returned to ROM by power-on
System restarted at 11:04:16 UTC Wed Mar 10 2010
System image file is “flash:c3725-advipservicesk9-mz.124-3.bin”

It’s 12.4-3 Version….

a. rahman isnaini r.sutan

1. Install Sony Ericsson W200 Driver
2. Inspecting which COM Port it’s connected.
3. Use that port to communicate.
4. Use Hyper Terminal to check : [Communication between PC & SE W200 is fine].

AT
OK
AT+CMGF=1
OK
AT+CMGW=”+628176388704″
> A simple demo of SMS text messaging.
+CMGW: 1

OK
AT+CMSS=1
+CMSS: 20

OK

Here is a description of what is done in the above example:

*      Line 1: “AT” is sent to the GSM / GPRS modem to test the connection. The GSM / GPRS modem sends back the result code “OK” (line 2), which means the connection between the HyperTerminal program and the GSM / GPRS modem works fine.
*      Line 3: The AT command +CMGF is used to instruct the GSM / GPRS modem to operate in SMS text mode. The result code “OK” is returned (line 4), which indicates the command line “AT+CMGF=1″ has been executed successfully. If the result code “ERROR” is returned, it is likely that the GSM / GPRS modem does not support the SMS text mode. To confirm, type “AT+CMGF=?” in the HyperTerminal program. If the response is “+CMGF: (0,1)” (0=PDU mode and 1=text mode), then SMS text mode is supported. If the response is “+CMGF: (0)”, then SMS text mode is not supported.

My SE W200 Respond : [Not Support SMS Text Mode]
=========================================
OK

+CPIN: READY

OK

+CMS ERROR: 303

OK

+CMS ERROR: 303

+CMS ERROR: 303

+CMGF: (0)

OK
===================

*      Line 5 and 6: The AT command +CMGW is used to write an SMS text message to the message storage of the GSM / GPRS modem. “+85291234567″ is the recipient mobile phone number. After typing the recipient mobile phone number, you should press the Enter button of the keyboard. The GSM / GPRS modem will then return a prompt “> ” and you can start typing the SMS text message “A simple demo of SMS text messaging.”. When finished, press Ctrl+z of the keyboard.
*      Line 7: “+CMGW: 1″ tells us that the index assigned to the SMS text message is 1. It indicates the location of the SMS text message in the message storage.
*      Line 9: The result code “OK” indicates the execution of the AT command +CMGW is successful.
*      Line 10: The AT command +CMSS is used to send the SMS text message from the message storage of the GSM / GPRS modem. “1″ is the index of the SMS text message obtained from line 7.
*      Line 11: “+CMSS: 20″ tells us that the reference number assigned to the SMS text message is 20.
*      Line 13: The result code “OK” indicates the execution of the AT command +CMSS is successful.

a. rahman isnaini r.sutan

TRUE or FALSE can be value, formula, or text.

Problem : What if the we need more option/conditions…
Let say, below my excel file.

I need to manipulate my cell on E23 with IF.
The condition has to be :
1. If the D23 is similar to D16, then E23 will show text “128 Kbps”
2. If the D23 is similar to E16, then E23 will show text “256 Kbps”
3. If the D23 is similar to F16, then E23 will show text “392 Kbps”
4. If the D23 is similar to G16, then E23 will show text “512 Kbps”
5. If the D23 is similar to H16, then E23 will show text “1024 Kbps”
2. If the D23 is similar to I16, then E23 will show text “2048 Kbps”

So the IF function would be :
=IF(D23=D16,”128 Kbps”,IF(D23=E16,”256 Kbps”, IF(D23=F16,”392 Kbps”, IF(D23=G16,”512 Kbps”, IF(D23=H16,”1024 Kbps”, IF(D23=I16,”2048 Kbps”))))))

I don’t have any idea, how the maximum if function can be extend that way.

Lately I Found, “128 Kbps” we can replace with D14 without ” ” etc…

a. rahman isnaini r.sutan